تایمر دیجیتال روپنلی مدل XY-WJ01 ولتاژ ۶ الی ۳۰ ولت

QYF-DS01 / XY-WJ01

Turn On time;

Turn OFF time;

XXXX

Delay Relay Module

XY-WJ01

DC 6V-30V

10A(Max)

15mA

50mA

-40~85℃

5%-99%RH

Storage Battery, Lithium battery

High level trigger (3.0V~24V), Low level trigger (0.0V~0.2V), switching control (passive switch)

Yes

79*44*26mm

Relay will keep ON for time OP after get trigger signal and then relay OFF;The input signal is invalid if get trigger signal again during delay time OP.

Relay will keep ON for time OP after get trigger signal and then relay OFF;Module will restart delay if get trigger signal again during delay time OP.

Relay will keep ON for time OP after get trigger signal and then relay OFF;Module will reset and stop timing if get trigger signal again during delay time OP.

Relay will keep OFF for time CL after get trigger signal and then relay keep ON.

Relay will keep ON for time OP after get trigger signal and then relay keep OFF for time CL and then loops the above action.Module will reset and stop timing and relay will keep initial state if get trigger signal again during loops.The number of cycles (LOP) can be set.Relay will keep OFF if end loop.

Relay will keep OFF for time CL after get trigger signal and then relay keep ON for time OP and then loops the above action.Module will reset and stop timing and relay will keep initial state if get trigger signal again during loops.The number of cycles (LOP) can be set.Relay will keep ON if end loop.

Relay will keep ON for time OP after power on without get trigger signal and then relay keep OFF for time CL and then loops the above action.The number of cycles (LOP) can be set.Relay will keep OFF if end loop.

Relay will keep OFF for time CL after power on without get trigger signal and then relay keep ON for time OP and then loops the above action.The number of cycles (LOP) can be set.Relay will keep ON if end loop.

Signal hold function.Reset delay time and relay keep ON if keep get trigger signal.Relay OFF when the signal disappears after delay time OP.Reset delay time when get trigger signal again during timing.

Signal hold function.Reset delay time and relay keep OFF if keep get trigger signal.Relay ON when the signal disappears after delay time CL.Reset delay time when get trigger signal again during timing

System will start to delay if short press button ‘Pause’ when system does not get trigger signal.Display screen will display ‘OUT’ and flashing and Relay OFF when Pause timing if the system has been timed.

Other buttons cannot be used when ‘Pause’ button as a trigger signal in running interface.

Number of cycles.Range is 1-9999tims.’----’ means unlimited loop.

keep press button for more than 3second.

Short press ‘SET ’ is invalid at mode P0,P1,P2,P3,P7,P8.

Long press button 'Pause' in the normal running interface(P0~P7) to turn on or off auto sleep function.

OFF,Turn OFF auto sleep function.

In the running interface, short press the SET button to display the current parameter settings of the system, which does not affect the normal operation of the system.

It will switch the display content by short press button 'DOWN' in the P5~P6 mode(Parameter is Run time or number of cycles)